OUR MISSION: To facilitate communication among glass artists, to encourage education and promote excellence in the glass arts.
 
 
 
 
 

                                          

 
Glass can do most anything. From bottles to spacecraft windows, glass
products include three types of materials:
  • Formers are the basic ingredients. Any chemical compound that
    can be melted and cooled into a glass is a former. (With enough heat, 100% of the earth's crust could be made into glass.)
  • Fluxes help formers to melt at lower temperatures.
  • Stabilizers combine with formers and fluxes to keep the finished
    glass from dissolving, crumbling, or falling apart.

Chemical composition determines what a glass can do. There are many thousands of glass compositions and new ones are being developed every day.

Formers

Most commercial glass is made with sand that contains the most common former, Silica. Other formers include:

  • Anhydrous Boric Acid
  • Anhydrous Phosphoric Acid

But melting sand by itself is too expensive because of the high temperatures required (about 1850°C, or 3360°F).

Fluxes

Fluxes let the former melt more readily and at lower temperatures (1300°C, or 2370°F). These include:

  • Soda Ash
  • Potash
  • Lithium Carbonate

But fluxes also make the glass chemically unstable, liable to dissolve in water or form unwanted crystals. So stabilizers need to be added.

Stabilizers

Stabilizers are added to make the glass uniform and keep its special structure intact. These include:

  • Limestone
  • Litharge
  • Alumina
  • Magnesia
  • Barium Carbonate
  • Strontium Carbonate
  • Zinc Oxide
  • Zirconia

Based on an article at: http://www.cmog.org/dynamic.aspx?id=5664

[previous glass tip]                                          [next glass tip]

 

 



 
 
 

 

follow IGGA  follow IGGA

   composition of glass